Construx comprised of a number of parts primarily Beams, Knots (often known as 'Blue Bits'), Panels and other more specialist parts.
Knots[]
Part Name | Size | Description | Colours | Colour Variant 1 Picture | Colour Variant 2 Picture | Colour Variant 3 Picture | Colour Variant 4 Picture |
---|---|---|---|---|---|---|---|
6-Peg Knot ("Blue Bit") |
|
||||||
5-Peg Knot |
|
||||||
5-Peg Slip Knot |
|
||||||
4-Peg Hinge Knot ("Black Bit") |
|
||||||
4-Peg Diamond Knot |
|
||||||
4-Peg Flat Knot |
|
Beams[]
Part Name | Size | Description | Colours | Colour Variant 1 Picture | Colour Variant 2 Picture | Colour Variant 3 Picture | Colour Variant 4 Picture |
---|---|---|---|---|---|---|---|
1/2" Beam
(Short Beam) |
1/2" | Short F-F Beam. 1/2" x 1/2" x 1/2" |
|
||||
2" Beam
(Medium Beam) |
2" | Medium F-F Beam. 2" x 1/2" x 1/2" |
|
||||
4 1/2" Beam
(Long Beam) |
4 1/2" | Long F-F Beam. 4 1/2" x 1/2" x 1/2" |
|
||||
3/4" Nut Beam | 3/4" | Short F-F + M-M
3/4" x 1/2" x 7/8" |
|
||||
Small Angle Beam | Small 1 1/2" Long F-F Beam forming 3 sides of an octagon.
Includes Holes for Windscreens |
|
|||||
Large Angle Beam | Large 3 1/2" Long F-F Beam forming 3 sides of an octagon.
Includes Holes for Windscreens |
|
|||||
Large Left Curve Beam | Large 5 1/2" Long F-F Beam forming part of an ellipse.
Marked on Inside with "L". Includes Holes for Windscreens |
|
|||||
Large Right Curve Beam | Large 5 1/2" Long F-F Beam forming part of an ellipse.
Marked on Inside with "R". Includes Holes for Windscreens |
|
|||||
Flat Beam | 3 3/4" Long x 1/2" Wide | Flat F-F Connector Beam with a hook at each end. |
|
Cockpits[]
Part Name | Size | Description | Colours | Colour Variant 1 Picture | Colour Variant 2 Picture | Colour Variant 3 Picture | Colour Variant 4 Picture |
---|---|---|---|---|---|---|---|
Cockpit | 2" x 2" x 1 1/2" Deep | Square seat, with recesed back rest on the interior. Knot connector in base |
|
||||
Medium Clockpit | 3" Long x 1 7/8" Wide x 1 3/4" High | Rectangular cockpit. Recessed seat. Knot connector in base and two sides. |
|
||||
Long Cockpit | 6" Long x 1 7/8" Wide x 2" High | Long Cockpit with recessed seat. Knot connectors on front base sides and rear. Rear also has two semicircular sections with raised pegs to fit Large Cylinders.
Interior has flat area for paper controls decal. |
|
||||
Medium Cockpit Canopy | 2 7/8" Long x 1 3/4 Wide x 5/8" High | Rectangular cockpit canopy with opening to allow figurine to protrude though the top. |
|
||||
Long Cockpit Canopy | 5" Long x 1 7/8" Wide x 1 5/8" High | Long clear wedge shaped Canopy for Long Cockpit. |
|
Panels[]
Part Name | Size | Description | Colours | Colour Variant 1 Picture | Colour Variant 2 Picture | Colour Variant 3 Picture | Colour Variant 4 Picture |
---|---|---|---|---|---|---|---|
Small Rectangular Press-In Panel | 2" Long x 3/4" Wide | Small Rectangular press-in panel |
|
||||
Large Rectangular Press-In Panel | 4 3/8" Long x 1 7/8" Wide | Large rectangular press-in panel |
|
||||
Large Rectangular Press-In Panel (Ribbed) | 4 3/8" Long x 1 7/8" Wide | Large rectangular press-in panel with ribbed surface. |
|
||||
Very Large Rectangular Press-In Panel (Textured) | 9" x 4 1/4" Wide | Very Large rectangular press-in panel with ribbed surface. |
|
||||
Square Press-In Panel | 2" x 2" | 2" Square press-in panel. |
|
||||
Cut Corner Square Press-In Panel | 2" x 2" | 2" Square Panel with one corner removed. Fits shape formed using Large Angle Beam in place of two sides of the square. |
|
||||
Large Square Press-In Panel (Textured) | 4 1/4" x 4 1/4" | 4 1/4" Large Square press-in panel with 9 evenly spaced textured lines. |
|
||||
Large Sail-Shaped Press-In Panel (Left) | 4 1/4" x 2" | Large Sail-Shaped press-in panel, to fit shaped formed when two sides of a rectangle are replaced with Left Curved Beam. Back of panel marked "L". |
|
||||
Large Sail-Shaped Press-In Panel (Right) | 4 1/4" x 2" | Large Sail-Shaped press-in panel, to fit shaped formed when two sides of a rectangle are replaced with Right Curved Beam. Back of panel marked "R". |
|
||||
Small Triangular Beam Panel | 3 1/4" Long x 1 3/4 Wide x 1/2" Thick | Small thick Triangular beam panel with Knot connectors positioned along its edges. | |||||
Large Triangular Beam Panel (Left) | 4 3/4" Long x 2 1/4" Wide x 1/2" Thick | Large thick Triangular beam panel with Knot connectors positioned along its edges. Back of panel marked "L". |
|
||||
Large Triangular Beam Panel (Right) | 4 3/4" Long x 2 1/4" Wide x 1/2" Thick | Large thick Triangular beam panel with Knot connectors positioned along its edges. Back of panel marked "R". |
|
||||
Large Square Beam Panel | 4 1/4" x 4 1/4" x 1/2" Thick |
|
Windscreens
Part Name | Size | Description | Colours | Colour Variant 1 Picture | Colour Variant 2 Picture | Colour Variant 3 Picture | Colour Variant 4 Picture |
---|---|---|---|---|---|---|---|
Angled Windscreen | 3 1/2" x 2" Wide | Angled windscreen with fixing pegs to allow it to hinge open. To fit between Large Angle Beams |
|
||||
Curved Windscreen | 5 1/4" x 2" Wide | Eliptical cross section windscreen with fixing pegs to allow it to hinge open. To fit between Large Curve Beams |
|
[]
Figures (Single Part)[]
Part Name | Size | Description | Colours | Colour Variant 1 Picture | Colour Variant 2 Picture | Colour Variant 3 Picture | Colour Variant 4 Picture |
---|---|---|---|---|---|---|---|
Man (Imagination Series) | 3" |
|
|||||
Astronaut (Space Series) | 3" |
|
|||||
Astronaut 2 | 2 3/4" |
|
|||||
Military Figure (Military Series) | 3 |
|
|||||
Militray Pilot | 3 |
|
|||||
Alien 1 (Alien Series) | 2 7/8" |
|
|||||
Alien 2 (Alien Series) | 3 1/8" |
|
Figures (Multi Part)[]
Engines[]
Part Name | Size | Description | Colours | Colour Variant 1 Picture | Colour Variant 2 Picture | Colour Variant 3 Picture | Colour Variant 4 Picture |
---|---|---|---|---|---|---|---|
Small Engine | 2" Long x 3/4" Wide x 3/4" High | Small rectangular engine with cylinders molded in top. |
|
||||
Large Engine | 2" Long x 1 78" Wide x 3/4" High | Large square engine molded to look like top of a V6. |
|
||||
Left Thruster | 1 5/8" Long x 1" Wide x 3/4" High | Rounded bodied thruster engine with exhaust cone.
Underside marked "L" |
|
||||
Right Thruster | 1 5/8" Long x 1" Wide x 3/4" High | Rounded bodied thruster engine with exhaust cone.
Underside marked "R" |
|
Cones and Large Cylinders[]
Part Name | Size | Description | Colours | Colour Variant 1 Picture | Colour Variant 2 Picture | Colour Variant 3 Picture | Colour Variant 4 Picture |
---|---|---|---|---|---|---|---|
Large Cylinder | 2 1/2" Long x 2" Diameter | Large Hollow Cylinder.
Closed end with "+" shape for Beams and central Knot connector. Open end crenelated pattern to receive Knots and Smalls Stops. |
|
||||
Jet Engine Fan | 7/8" Long x 1 3/4" Diameter | Jet Engine Fan Pattern. |
|
||||
Round Dome | 1" Tall x 2" Diameter | Dome or Cone shape. Top has Knot connector
Bottom Rim has 4 teeth to connect Small Stops |
|
||||
Pyramid Dome | 1" Tall x 2" Across Base | Top forms Flat surface with Knot connector
Sides Step down. Bottom rim forms octagonal shape with Knot connector on each face. |
|
Wheels Pullies and Related Parts[]
Part Name | Size | Description | Colours | Colour Variant 1 Picture | Colour Variant 2 Picture | Colour Variant 3 Picture | Colour Variant 4 Picture |
---|---|---|---|---|---|---|---|